Daikin R32 High Static Duct FXMA-A

Product features
Optimised design for R-32 refrigerant
Even rooms with ceilings up to 3.5m can be heated up or cooled down very easily without capacity loss
Can easily be installed in both new and refurbishment projects
Individual flap control: flexibility to suit every room layout without changing the location of the unit!
Stylish unit blends easily with any interior. The flaps close entirely when the unit is not operating.
Optimum comfort guaranteed with automatic air flow adjustment to the required load
5 different discharge angles between 0 and 60°can be programmed via the remote control
Standard drain pump with 720mm lift increases flexibility and installation speed

Onecta app (optional)
Control your indoor climate from any location via smartphone or tablet

Presence & floor sensor
The presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor.

Home leave operation
Maintains the indoor temperature at your specified comfort level during absence, thus saving energy

Fan only
The unit can be used as fan, blowing air without heating or cooling.

Draught prevention
When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.

Auto cooling-heating changeover
Automatically selects heating or cooling mode to achieve the set temperature.

Individual flap control
Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well.

Vertical auto swing
Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.

Fan speed steps
Allows to select up to the given number of fan speed.

Dry programme
Allows humidity levels to be reduced without variations in room temperature.

Air filter
Removes airborne dust particles to ensure a steady supply of clean air.

Weekly timer
Can be set to start heating or cooling anytime on a daily or weekly basis.

Infrared remote control
Starts, stops and regulates the air conditioner from a distance.

Wired remote control
Starts, stops and regulates the air conditioner.

Centralised control
Starts, stops and regulates several air conditioners from one central point.

Auto-restart
The unit restarts automatically at the original settings after power failure.

Self diagnosis
Simplifies maintenance by indicating system faults or operating anomalies.

Drain pump kit
Facilitates condensation draining from the indoor unit